Книги - ч.2

[mihail62]

Рудничная автоматика



Название: Рудничная автоматика
Автор: Мирский М.И.
Издательство: М.: Недра
Год: 1992
Страниц: 160
ISBN: 5-247-01556-8
Формат: PDF
Размер: 10.4 Мб
Язык: русский

В учебном пособии изложены основы автоматического управления и телемеханизации. Рассмотрены элементы систем рудничной автоматики: датчики, реле контроля технологических параметров, усилители, логические элементы, исполнительные устройства. Приведены сведения по автоматизации контроля содержания метана в шахтной атмосфере. Описаны схемы и устройства автоматизации технологических процессов и основных объектов в шахтах.
Второе издание (1-е изд. 1982) дополнено материалом по технологическим и вычислительным системам.
Для учащихся профессионально-технических училищ; может быть использован при профессиональном обучении рабочих на производстве.

Скачать с glbupload.com
Скачать с salefiles.com
Скачать с turbobit.net

[mihail62]

Радиопередающие и радиоприемные устройства



Название: Радиопередающие и радиоприемные устройства
Автор: Супрун Б.К., Шерепа В.Ф.
Издательство: М.: Изд-во стандартов
Год: 1968
Страниц: 309
Формат: PDF, DJVU
Размер: 13 Мб
Язык: русский

В книге изложены основные вопросы теории радиопередающих и радиоприемных устройств; рассматриваются элементы, передатчика и приемника и описывается физическая сущность процессов, происходящих в них; уделено внимание вопросам настройки и испытания передатчиков и приемников.
Книга предназначена для учащихся средних специальных учебных заведений Комитета стандартов, мер и измерительных приборов при Совете Министров СССР и может быть использована студентами техникумов, в которых читается курс "Радиопередающие и радиоприемные устройства".

http://glbupload.com/neplu5lsom32/r_..._1968.rar.html
http://salefiles.com/ij46wvslfymn/r_..._1968.rar.html
http://turbobit.net/43byeulur1df.html

[mihail62]

Communications Receivers: Principles and Design, Fourth Edition



Название: Communications Receivers: Principles and Design, Fourth Edition
Автор: Ulrich L. Rohde
Издательство: McGraw-Hill
Год: 2017
Страниц: 940
ISBN: 0071843337, 978-0071843331
Формат: PDF (conv)
Размер: 129 Мб
Язык: English

This thoroughly updated guide offers comprehensive explanations of the science behind today’s radio receivers along with practical guidance on designing, constructing, and maintaining real-world communications systems. You will explore system planning, antennas and antenna coupling, amplifiers and gain control, filters, mixers, demodulation, digital communication, and the latest software defined radio (SDR) technology.
Written by a team of telecommunication experts, Communications Receivers: Principles and Design, Fourth Edition, features technical illustrations, schematic diagrams, and detailed examples.

Coverage includes:

• Basic radio considerations
• Radio receiver characteristics
• Receiver system planning
• Receiver implementation considerations
• RF and baseband techniques for Software-Defined Radios
• Transceiver SDR considerations
• Antennas and antenna coupling
• Mixers
• Frequency sources and control
• Ancillary receiver circuits
• Performance measurement

Скачать с glbupload.com
Скачать с salefiles.com
Скачать с turbobit.net

[mihail62]

Starting Electronics



Название: Starting Electronics
Автор: Keith Brindley
Издательство: Newnes
Год: 2005
Страниц: 289
ISBN: 9780750663861, 0750663863
Формат: PDF, DJVU
Размер: 10 Мб
Язык: English

Starting Electronics is unrivalled as a highly practical introduction for hobbyists, students and technicians. Keith Brindley introduces readers to the functions of the main component types, their uses, and the basic principles of building and designing electronic circuits.
Breadboard layouts make this very much a ready-to-run book for the experimenter; and the use of multimeter, but not oscilloscopes, puts this practical exploration of electronics within reach of every home enthusiast's pocket.
The third edition has kept the simplicity and clarity of the original. New material includes sections on transducers and more practical examples of digital ICs.
· A punchy, practical introduction to self-build electronics
· The ideal starting point for home experimenters, technicians and students who want to develop the real hands-on skills of electronics construction
· Circuits use breadboards, a multimeter and widely available components, making them accessible to the first-time electronics experimenter

Contents

Preface vi
1. The very first steps 1
2. On the boards 23
3. Measuring current and voltage 51
4. Capacitors 77
5. ICs oscillators and filters 99
6. Diodes I 123
7. Diodes II 145
8. Transistors 167
9. Analogue integrated circuits 185
10. Digital integrated circuits I 207
11. Digital integrated circuits II 241
Glossary 267
Quiz answers 280
Index 281

Скачать с glbupload.com
Скачать с salefiles.com
Скачать с turbobit.net

[AversT]

МРБ 0628
Туннельные диоды в приемно-усилительных устройствах. Янчук Е.В. 1967

1.6 MB, DjVu, OCR https://yadi.sk/i/yUEhGUZA3FcJBo
2 MB, PDF https://yadi.sk/i/V8HVQO0q3FcJGt
3.98 MB, PDF + DjVu http://depositfiles.com/files/nivo6omsj

Scan: AAW, DjVuing: pohorsky

[mihail62]

Automatic Control Systems, Tenth Edition (+zip-file Appendics)



Название: Automatic Control Systems, Tenth Edition (+zip-file Appendics)
Автор: Golnaraghi F., Kuo B.
Издательство: McGraw-Hill
Год: 2017
Страниц: 1160
ISBN: 978-1-25-964384-2
Формат: PDF
Размер: 145 Мб
Язык: English

A complete toolkit for teaching, learning, and understanding the essential concepts of automatic control systems
Edition after acclaimed edition, Automatic Control Systems has delivered up-to-date, real-world coverage designed to introduce students to the fundamentals of control systems. More than a comprehensive text, Automatic Control Systems includes innovative virtual labs that replicate physical systems and sharpen readers’ problem-solving skills.
The Tenth Edition introduces the concept of Control Lab, which includes two classes of experiments: SIMLab (model-based simulation) and LEGOLab (physical experiments using LEGO robots). These experiments are intended to supplement, or replace, the experimental exposure of the students in a traditional undergraduate control course and will allow these students to do their work within the MATLAB and Simulink environment?even at home. This cost-effective approach may allow educational institutions to equip their labs with a number of LEGO test beds and maximize student access to the equipment at a fraction of the cost of currently available control system experiments. Alternatively, as a supplemental learning tool, students can take the equipment home and learn at their own pace.

Contents

Introduction to Control Systems
Modeling of Dynamic Systems
Solution of Differential Equations of Dynamic Systems
Block Diagrams and Signal-Flow Graphs
Stability of Linear Control Systems
Important Components of Feedback Control Systems
Time-Domain Performance of Control Systems
State-Space Analysis and Controller Design
Root-Locus Analysis
Frequency-Domain Analysis
Design of Control Systems
Index

Скачать с glbupload.com
Скачать с salefiles.com
Скачать с turbobit.net

[AversT]

МРБ 0625
Схемы на четырехслойных полупроводниковых приборах. Кублановский Я.С. 1967

0.8 MB, DjVu, OCR https://yadi.sk/i/AvZOWX6P3Fd8hC
1.5 MB, PDF https://yadi.sk/i/V53v2xOG3Fd8rR
2.52 MB, PDF + DjVu http://dfiles.ru/files/94ohzgnch

Scan: AAW, DjVuing: pohorsky

[mihail62]

Valve Amplifiers, Third Edition



Название: Valve Amplifiers, Third Edition
Автор: Morgan Jones
Издательство: Newnes
Год: 2003
Страниц: 633
ISBN: 0750656948, 9780750656948
Формат: PDF, DJVU
Размер: 10.8 Мб
Язык: English

Morgan Jones' Valve Amplifiers has been widely recognised as the most complete guide to valve amplifier design, modification, analysis, construction and maintenance written for over 30 years. As such it is unique in presenting the essentials of 'hollow-state' electronics and valve amp design for engineers and enthusiasts in the familiar context of current best practice in electronic design, using only currently available components. The author's straightforward approach, using as little maths as possible, and lots of design knowhow, makes this book ideal for those with a limited knowledge of the field as well as being the standard reference text for experts in valve audio and a wider audience of audio engineers facing design challenges involving valves.

Скачать с file-upload.cc
Скачать с salefiles.com
Скачать с turbobit.net

[mihail62]

Electronics: A Fiist Course



Название: Electronics: A Fiist Course
Автор: Bishop O.
Издательство: Elsevier
Год: 2011
Страниц: 252
ISBN: 9781856176958
Формат: PDF
Размер: 11.4 Мб
Язык: English

Owen Bishop's First Course starts with the basics of electricity and component types, introducing students to practical work almost straight away. No prior knowledge of electronics is required. The approach is student-centred with self-test features to check understanding, including numerous activities suitable for practicals, homework and other assignments. Multiple choice questions are incorporated throughout the text in order to aid student learning.
Key facts, formulae and definitions are highlighted to aid revision, and theory is backed up by numerous examples within the book. Each chapter ends with a set of problems that includes exam-style questions, for which numerical answers are provided at the end of the book. This text is ideal for a wide range of introductory courses in electronics, technology, physics and engineering. The coverage has been carefully matched to the latest UK syllabuses including GCSE Electronics, GCSE Design & Technology, Engineering GCSE and Edexcel's BTEC First in Engineering, resulting in a text that meets the needs of students on all Level 2 electronics units and courses.
Owen Bishop's talent for introducing the world of electronics has long been a proven fact with his textbooks, professional introductions and popular circuit construction guides being chosen by thousands of students, lecturers and electronics enthusiasts. . Experienced author who has written more than 70 educational books. Companion website that includes animations, PowerPoint slides and answers to questions from the book. Hundreds of drawings and photographs to illustrate the topics covered in the course of the book.

Скачать с file-upload.cc
Скачать с salefiles.com
Скачать с turbobit.net

[mihail62]

Programming the Intel Edison: Getting Started with Processing and Python



Название: Programming the Intel Edison: Getting Started with Processing and Python
Автор: Donald Norris
Издательство: McGraw-Hill
Год: 2016
Страниц: 232
ISBN: 1259588335, 9781259588334
Формат: EPUB, DJVU (conv)
Размер: 24.5 Мб
Язык: English

Learn To Easily Create Robotic, IoT, and Wearable Electronic Gadgets!
Get up-and-running building cutting-edge Edison devices with help from this DIY guide. Programming the Intel Edison: Getting Started with Processing and Python lays out the Edison’s powerful features and teaches the basics of Internet-enabled embedded programming. Discover how to set up components, connect your PC or Mac, build Python applications, and use USB, WiFi, and Bluetooth connections. Start-to-finish example projects include a motor controller, home temperature system, robotic car, and wearable hospital alert sensor.

Explore the capabilities and features of the EdisonConnect Sparkfun, Break-out, and Arduino boardsProgram your Edison through the Arduino IDESet up USB, GPIO, WiFi, and Bluetooth connections

Introduction
Working with Processing, the Arduino Programming Environment
Introduction to Edison
Getting Started with the Edison Arduino Development Board
Working with Processing and the Arduino IDE
Edison-Controlled Robot
Working with the Linux OS and the Python Language
Connecting to the Edison Linux OS Using a Command Line Prompt
Python Basics
Python Objects, Classes, and Methods
Graphical User Interface (GUI)
Hardware Interfaces
Data Logging to a Database
What's Next

Скачать с file-upload.cc
Скачать с sibit.net
Скачать с salefiles.com
Скачать с turbobit.net